Who says Halloween can't be glam?
Preparation
Sandwich back-to-back, sparkly side out, 2 sheets of A4 orange & black glitter fabric. Glue in place.
With a standard hole punch, cut out one row of holes along one long edge. This will form the rim of your tub, where you thread the ribbons through.
Cut a mixture of orange, black, purple & green ribbons to different lengths.
Thread decorative beads onto a piece of strong malleable wire to make a handle.
On the reverse of a piece of glitter fabric draw a circle using a compass set at 57.10mm mm radius. Cut the circle out of the fabric with a pair of sharp scissors. Draw another circle in the middle - compass setting: 47.10mm. Now, at 1cm intervals cut from the outside edge inwards to the inner circle/line creating a fringe. This will form the base of your bucket.
  |
Start
Glue our black distressed lace trimming around the long edge of the glitter fabric sandwich which has the holes
Tie the contrasting ribbons through the holes & knot in place.
Bend the fabric round so that the ends butt together to create a cylinder shape. Glue into place and cover join with a piece of decorative ribbon
Now slide the base into place & fold the cut sections up onto the inside cylinder walls. Glue in place.
Thread the handle through opposite points of the ribbon rim and tie in place.
Finish the rim off with a row of black & white strung sequin. Glue in place.
Top off with an oversized orange plastic button
Tip: It doesn’t matter if the ribbons fray – this will add to the look!
All items available from JosyRose.com
No comments:
Post a Comment